Skip to main content
Iron Crest Remodel — Home
Walk-In Shower Pan Rebuild in Mountain Home

Walk-In Shower Pan Rebuild in Mountain Home

Mountain Home

Quick answer

Iron Crest Remodeling Group LLC completed this shower remodeling project in Mountain Home. A Mountain Home homeowner came to Iron Crest with a half-finished walk-in shower whose pan had not been built correctly by an earlier contractor. We removed the pan, drain and curb, rebuilt all three with new waterproofing, trimmed the existing wall panels and added 6-inch tile bands at the base and top, and finished the floor in pebble tile — keeping the wall panels that were still sound.

Project Overview

A Mountain Home homeowner came to Iron Crest with a half-finished walk-in shower whose pan had not been built correctly by an earlier contractor. We removed the pan, drain and curb, rebuilt all three with new waterproofing, trimmed the existing wall panels and added 6-inch tile bands at the base and top, and finished the floor in pebble tile — keeping the wall panels that were still sound.

Rebuilt
Shower pan, drain & curb
Tile Bands
6 in at base and top
Shower Floor
Pebble tile
Wall Panels
Existing, kept

Planning something similar in Mountain Home? Call (208) 779-5551 or use the form to request a free estimate.

Before & After

Drag the slider to compare the transformation of this shower remodeling project in Mountain Home.

Before: original condition before shower remodeling

Before

After: completed shower remodeling

After

Project Photos

Before

Failed walk-in shower pan torn out to the subfloor in a Mountain Home bathroom
Before: the improperly built pan removed down to the subfloor
Shower subfloor and drain opening after the old pan and curb were removed in Mountain Home
Before: drain opening and subfloor after demolition

After

Finished walk-in shower in Mountain Home with pebble tile floor, new curb and accent tile bands
After: new pan and pebble floor with tile bands at the base and top
Completed Mountain Home walk-in shower with tiled half wall, pebble floor and wall panels
After: the finished walk-in shower

The Challenge

The shower was stuck halfway: wall panels were up, but the pan underneath was wrong, and a shower pan is not something you can patch. The pan, drain and curb all had to come out down to the subfloor. The wall panels were in good shape, so the job was to fix what was failing without tearing out and paying twice for what was not.

Our Solution

We demolished the existing pan, drain and curb, then built a new pan, drain and curb with waterproofing under the tile. To tie the new pan into the walls cleanly, the existing wall panels were cut 6 inches up from the bottom all the way around, and a 6-inch tile band was set at the base — with a matching band at the top — plus tile edge trim along the open edges. The floor is pebble tile. The homeowner selected and supplied the tile; Iron Crest supplied the pan, drain, curb, waterproofing, edge trim and setting materials, and did all the labor.

The Result

The homeowner has a finished, watertight walk-in shower instead of a stalled project: a new pan and drain under a pebble tile floor, accent tile bands that frame the panel walls top and bottom, and clean trimmed edges on the curb and half wall. Keeping the sound wall panels meant the budget went to the part that had actually failed.

How We Did It

1

Demolition

Removal of the improperly built shower pan, drain and curb down to the subfloor

2

Pan, Drain & Curb

New shower pan, drain and curb built with waterproofing under the tile

3

Panel Trim

Existing wall panels cut 6 inches up from the bottom all the way around to receive the base tile band

4

Tile

6-inch tile bands at the base and top, tile edge trim, and pebble tile on the shower floor

5

Grout & Finish

Grouting, sealing, silicone at changes of plane, and final walkthrough

Key Features

Failed pan, drain and curb fully replaced
Waterproofing under the new tile
Sound wall panels kept instead of torn out
6-inch tile band at the base and top
Pebble tile floor
Tile edge trim on the curb and half wall
Homeowner-supplied tile, Iron Crest-supplied everything else

Materials Used

New shower pan and curb
New shower drain
Waterproofing under the tile
Pebble tile shower floor (homeowner-supplied)
Accent tile bands (homeowner-supplied)
Tile edge trim, thin-set, grout, sealer and silicone

Shower Remodeling in Mountain Home: Questions About This Project

Can a bad shower pan be fixed without tearing out the whole shower?

Often, yes. On this Mountain Home shower the wall panels were sound, so we kept them. We cut the panels 6 inches up from the bottom, removed and rebuilt the pan, drain and curb, and covered the cut line with a 6-inch tile band.

What are signs a shower pan was installed wrong?

Common signs are water that does not flow to the drain or puddles in corners, leaks at the curb or into the room below, a floor that flexes or cracks, and a loose or poorly sealed drain. A pan cannot be reliably patched; the fix is removing it and rebuilding it with proper waterproofing.

Why use pebble tile on a shower floor?

Pebble tile has many grout joints, which gives good traction underfoot, and the small stones follow the slope of the pan toward the drain.

Can I supply my own tile for a shower remodel?

Yes. On this project the homeowner chose and supplied the tile, and Iron Crest supplied the pan, drain, curb, waterproofing, edge trim and setting materials, plus all of the labor.

Does Iron Crest work in Mountain Home?

Yes. Iron Crest Remodel takes shower and bathroom projects in Mountain Home as well as Boise, Meridian, Nampa, Kuna and the rest of the Treasure Valley.

Planning a shower remodeling project?

Get a free, no-obligation estimate for your project in Mountain Home or anywhere in the Treasure Valley.