
From full house repaints to deck staining and trim refreshes — we deliver lasting, weather-resistant results with premium coatings and meticulous surface preparation.
Protect and transform your home's exterior with professional painting and staining built to withstand Idaho weather.

Exterior painting protects your home from Idaho's intense UV exposure, freeze-thaw cycles, wind-driven rain, and seasonal temperature swings that range from below zero in January to over 100 degrees in July. Professional exterior painting goes far beyond rolling paint on siding — it includes power washing, scraping loose paint, sanding rough surfaces, caulking gaps and joints, priming bare wood, and applying two coats of premium exterior paint rated for the Treasure Valley's demanding climate. The quality of prep work determines how long an exterior paint job lasts; cutting corners on preparation is the number one reason exterior paint fails prematurely. A properly prepped and painted exterior should last 8-12 years in the Boise climate when using quality products and correct application techniques.
Boise homeowners pursue exterior painting for a variety of reasons. Here are the most common situations we see:
Not every exterior painting project is the same. Here are the most common project types we complete in Boise:

Complete painting of all exterior surfaces including siding, trim, fascia, soffits, eaves, and window frames. Includes power washing, scraping, caulking, priming, and two coats of premium exterior paint.

Targeted painting of exterior trim elements that show wear faster than siding. Includes scraping, sanding, priming, and two coats of durable semi-gloss or satin paint.

Cleaning, sanding, and staining wood decks and fences with penetrating or film-forming stain. Includes proper surface preparation, which is critical for stain adhesion and longevity in Boise's sun and moisture conditions.

High-impact refresh of entry and garage doors. Includes sanding, priming, and spray or brush application of durable exterior paint in your chosen color.

Application of semi-transparent or solid-body stain to wood siding, cedar accents, log elements, or timber features. Staining preserves the natural wood grain while providing UV and moisture protection.

Boise has over a century of residential construction, from 1900s Craftsman homes in the North End to 2020s new construction in West Boise and Southeast Boise. This diversity means remodeling contractors encounter a wide range of structural systems, plumbing types, electrical standards, and finish materials.
Craftsman bungalows, Tudor revivals, and foursquare homes with plaster walls, old-growth fir floors, knob-and-tube wiring (in some), galvanized plumbing, and brick or stone foundations. Remodeling these homes requires sensitivity to historic character while updating systems.
Post-war ranch homes and split-levels with hardwood floors, original tile bathrooms, copper plumbing, and 100-amp electrical panels. These homes often need kitchen and bathroom updates, electrical upgrades, and insulation improvements.
Subdivision homes with drywall, builder-grade cabinets, laminate countertops, carpet throughout, and basic builder fixtures. Most plumbing is copper or early PEX. These are the most common candidates for kitchen and bathroom remodels.
Modern construction with PEX plumbing, 200-amp panels, energy-efficient windows, and open floor plans. Remodeling in these homes typically focuses on upgrading builder-grade finishes rather than updating systems.

Material selection affects the look, durability, and cost of your exterior painting. Here are the most popular options we install in Boise:

A premium 100% acrylic exterior paint with exceptional durability, color retention, and mildew resistance. Self-priming on previously painted surfaces. Rated for extreme weather exposure.
Best for: Siding and large exterior surfaces that need maximum weather resistance

A top-tier exterior paint with ColorLock technology for fade resistance. Excellent adhesion and flexibility that resists cracking in temperature extremes. Low-VOC formula.
Best for: South- and west-facing walls that receive intense Boise sun exposure

A high-performance deck and fence stain available in semi-transparent and solid formulas. Provides UV protection, water resistance, and mildew resistance for horizontal wood surfaces.
Best for: Wood decks, fences, pergolas, and horizontal wood surfaces

Premium exterior caulking that remains flexible in Idaho's temperature extremes. Paintable, waterproof, and designed for long-term adhesion to wood, fiber cement, and vinyl surfaces.
Best for: Trim joints, window frames, siding gaps, and penetration sealing

Oil-based or shellac-based primers for blocking stains, tannin bleed on cedar, and ensuring adhesion on bare or weathered wood. Critical for long-lasting exterior paint adhesion.
Best for: Bare wood, cedar trim, stain-blocking, and tannin-prone surfaces

Here is how a typical exterior painting project works from first contact to final walkthrough:
We inspect all exterior surfaces — siding, trim, fascia, soffits, windows, doors, and any wood elements. We identify areas of peeling, cracking, rot, caulk failure, and substrate damage. You receive a detailed written estimate with specific prep and painting scope.
We help you select exterior colors that complement your roof, stone, landscaping, and neighborhood aesthetic. We recommend specific paint products rated for Idaho's climate and apply large test samples on the home so you can evaluate colors in natural light.
All exterior surfaces are power washed to remove dirt, mildew, chalking paint, and debris. Loose and peeling paint is scraped and sanded. Gaps, cracks, and joints are caulked. Bare wood and stained areas are spot-primed. This phase takes as long or longer than the actual painting.
Windows, doors, light fixtures, house numbers, downspouts, and landscaping are carefully masked and protected. Drop cloths cover walkways, driveways, and plantings near the work area.
Bare wood and repaired areas receive primer. Two coats of premium exterior paint are applied — by brush, roller, and airless sprayer as appropriate for each surface. Siding, trim, and detail elements are each painted with the proper technique and sheen.
Window frames, door frames, shutters, and decorative elements receive careful detail painting. All edges, corners, and transitions are inspected and touched up for clean, consistent results.
All masking is removed, overspray is cleaned, landscaping protection is cleared, and we conduct a walk-around inspection with you to verify coverage, color accuracy, and finish quality on every surface.
Here is what to expect for project duration when planning a exterior painting in Boise:
| Phase | Duration | Details |
|---|---|---|
| Assessment and Estimate | 1–3 days | Full exterior inspection, surface condition documentation, color consultation, and detailed written estimate. |
| Color Selection and Scheduling | 1–2 weeks | Final color selections, large-area test samples on the home, and project scheduling. Exterior painting in Boise is best scheduled between April and October for optimal conditions. |
| Power Washing and Prep | 1–3 days | Power washing, scraping, sanding, caulking, and priming. Extensive prep on older homes with significant paint failure may take longer. |
| Priming and Painting | 3–7 days | Primer application on bare surfaces, followed by two coats of exterior paint on all siding, trim, fascia, and detail elements. Weather-dependent scheduling may affect timing. |
| Detail Work and Touch-Ups | 1–2 days | Window trim, door frames, shutters, and decorative elements receive final detail painting. All edges and transitions are inspected and corrected. |
| Final Inspection and Cleanup | 1 day | Remove all masking, clean overspray, clear landscaping protection, and conduct a walk-around inspection with the homeowner. |
Typical range: $4,000 – $20,000+
Most projects: $7,000–$14,000
The final cost of your exterior painting in Boise depends on several factors. Here are the biggest cost drivers:
The total exterior surface area is the primary cost driver. A two-story home has significantly more paintable surface and requires ladder or scaffold access, which increases labor time and cost.
Homes with extensive peeling, cracking, or deteriorated paint require much more prep work — scraping, sanding, caulking, and priming — which can represent 40-60% of total project labor.
Wood lap siding, cedar shingles, fiber cement (HardiePlank), stucco, and vinyl each require different prep techniques, products, and application methods. Some materials require more coats or specialized primers.
A single siding color with matching trim is the most efficient. Multiple body colors, contrasting trim, detailed millwork, and decorative elements require additional masking, cutting in, and paint changes.
Tall peaks, steep rooflines, second-story soffits, and areas requiring scaffolding or lift equipment add labor time and equipment costs.
Damaged or rotted trim, fascia, or siding discovered during prep needs to be repaired or replaced before painting. Rot repair costs vary from minor patching to full board replacement.

Solution: We scrape all loose paint to a firm edge, sand transitions smooth, apply bonding primer, and build up new paint film from a solid substrate — ensuring long-term adhesion.
Solution: We use premium exterior paints with UV-resistant pigments and fade-resistant technology specifically rated for high-altitude, high-UV environments like the Treasure Valley.
Solution: We remove failed caulk, clean the joints, and apply premium flexible exterior caulk that can handle Idaho's temperature range from -10°F to 110°F without cracking or separating.
Solution: Power washing removes existing mildew, and premium exterior paints with built-in mildewcide prevent regrowth. Proper surface preparation ensures the mildew-resistant coating adheres properly.
Solution: We identify and repair or replace rotted wood before painting. Minor rot can be treated with wood hardener and filled with exterior wood filler; significant rot requires board replacement.

Boise has a semi-arid, four-season climate with hot, dry summers (90-105°F), cold winters (15-35°F), and low annual precipitation. This climate directly affects material choices, construction scheduling, and long-term durability of remodeling work.
Exterior materials must handle dramatic temperature swings. Windows need strong thermal performance. Interior comfort depends on insulation quality and HVAC sizing.
Wood materials can dry, shrink, and crack. Hardwood floors may develop gaps in winter. Bathroom ventilation is still critical because bathrooms create localized high-humidity environments.
Exterior tile, concrete, and masonry must handle freezing and thawing without cracking. Foundation work has specific frost-depth requirements in the Boise area.
Exterior paint, siding, and stain fade faster under constant UV. South-facing and west-facing surfaces require UV-resistant materials and more frequent maintenance.
Foundation and exterior work is best scheduled March through November. Interior remodeling can happen year-round. Winter concrete pours require special cold-weather precautions.
Boise's most historic and walkable neighborhood, with tree-lined streets, Craftsman bungalows, Tudor revivals, and mid-century homes dating from 1900 to 1960. The North End Historic District adds design review requirements for exterior work.
Common projects in North End:
A mix of established 1970s-1990s homes and newer master-planned developments like Harris Ranch. Homes range from mid-century ranch-style to modern custom builds with foothills views.
Common projects in Southeast Boise / Harris Ranch:
An elevated neighborhood south of downtown with a mix of post-war homes from the 1940s-1970s and newer infill construction. Known for its views and access to the Greenbelt.
Common projects in Boise Bench:
A large area with subdivisions spanning from the 1980s through the 2010s. Many homes are builder-grade with standard finishes that homeowners upgrade as the homes age.
Common projects in West Boise:
Permit authority: City of Boise Planning and Development Services
Online portal: https://pds.cityofboise.org
Here are the design trends we see most often in Boise exterior painting projects:
Boise's housing market has appreciated significantly over the past decade, with median home values rising from approximately $180,000 in 2015 to over $450,000 in recent years. This appreciation makes remodeling an increasingly attractive investment — homeowners can invest $30,000-80,000 in a kitchen or bathroom remodel and see it reflected in their property value. The competitive market also means that updated, well-maintained homes sell faster and for higher prices than comparable homes with outdated finishes.

A properly prepped and painted exterior using premium products should last 8-12 years in the Boise area. South- and west-facing walls may show wear sooner due to intense UV exposure. Quality surface preparation is the single biggest factor in paint longevity.
The ideal window for exterior painting in Boise is May through September, when temperatures are consistently above 50°F, humidity is low, and rain is infrequent. Early spring and late fall are possible but require careful weather monitoring.
A full exterior repaint for a typical single-story home in the Treasure Valley runs $4,000-8,000. Two-story homes typically cost $7,000-14,000. Costs vary based on home size, surface condition, prep requirements, and paint quality.
Yes. Power washing removes dirt, mildew, chalking paint, and debris that would prevent new paint from adhering properly. We power wash all exterior surfaces before scraping, sanding, and priming.
Yes. Fiber cement siding accepts paint very well and is one of the best substrates for exterior painting. We use 100% acrylic exterior paint that bonds to the cementitious surface and provides long-lasting color and protection.
If your siding is structurally sound and the surface condition allows for proper prep, repainting is significantly more cost-effective than residing. If siding is rotted, warped, or damaged beyond repair, replacement may be the better long-term investment.
We apply two coats of premium exterior paint over properly prepped and primed surfaces. Bare wood areas receive a coat of primer plus two finish coats. Two coats ensure proper mil thickness, UV protection, and long-term durability.
Yes. We identify all rot during the prep phase and repair or replace damaged wood before any paint is applied. Painting over rot without repair leads to continued deterioration and premature paint failure.
Yes. We have extensive experience remodeling homes from every era of Boise construction — from 1900s Craftsman homes in the North End to 1970s ranch homes on the Bench to 2000s builder-grade homes in West Boise. Each era presents different structural, plumbing, and electrical considerations that we plan for during the design phase.
Yes, most remodeling projects that involve plumbing, electrical, structural, or mechanical changes require permits from the City of Boise Planning and Development Services. We handle the entire permit process including application, submission, and inspection coordination.
Get a free, no-obligation estimate for exterior painting in Boise, ID. We handle design, permits, and every detail of construction.
Get Your Free Estimate