Whole-Home Remodeling in Meridian, ID
From outdated floor plans to modern open-concept living — we coordinate every trade, every finish, and every detail across your entire home renovation.
Reimagine your entire home with a unified remodeling plan built for how you actually live.
Licensed general contractor managing all trades under one contractDedicated project manager for the duration of the renovationDetailed room-by-room scope of work with fixed pricingWeekly progress updates with photos and schedule status
A whole-home remodel addresses every major system and finish in your house under a single project scope — framing and layout changes, electrical panel and circuit upgrades, plumbing updates, HVAC improvements, insulation, drywall, flooring, trim, paint, and fixture installation across every room. In the Treasure Valley, many homes built in the 1980s and 1990s have compartmentalized floor plans, outdated electrical systems, builder-grade finishes, and inefficient insulation that no longer meet modern standards for comfort, energy efficiency, or livability. A well-planned whole-home renovation transforms these properties into cohesive, modern spaces while addressing deferred maintenance and code compliance in a single mobilization. The key advantage of a whole-home approach is coordination — trades move efficiently through the house in sequence, finishes are consistent from room to room, and the homeowner avoids years of disruptive room-by-room projects.
Meridian homeowners pursue whole-home remodeling for a variety of reasons. Here are the most common situations we see:
- ✓Homeowners who bought a dated home and want to modernize everything at once rather than room by room
- ✓Families who have outgrown their layout and need better flow between kitchen, living, and dining areas
- ✓Homeowners planning to age in place who need accessibility upgrades, single-level living improvements, and updated systems throughout
- ✓Investors or buyers who purchased a fixer-upper and need a comprehensive renovation before move-in
- ✓Homeowners who want consistent finishes — flooring, trim, paint, hardware — throughout the entire house
Not every whole-home remodel project is the same. Here are the most common project types we complete in Meridian:
Complete Interior Renovation
Full gut and rebuild of every interior space including kitchen, bathrooms, bedrooms, and living areas. New flooring, drywall, trim, paint, lighting, and fixtures throughout. Layout changes and wall removals as needed.
Open-Concept Conversion
Remove interior walls between kitchen, dining, and living areas to create a modern open floor plan. Includes structural header installation, electrical and HVAC rerouting, flooring transitions, and finish work.
Main-Level Living Conversion
Reconfigure the main floor to include a primary bedroom suite, accessible bathroom, and laundry — allowing single-level living without using stairs. Ideal for aging-in-place planning.
Fixer-Upper Transformation
Comprehensive renovation of a recently purchased home that needs everything — updated electrical, new plumbing, insulation, drywall repair, flooring, kitchen, bathrooms, and cosmetic finishes throughout.
Phased Whole-Home Remodel
A planned multi-phase renovation that addresses the entire home over two or three stages, allowing homeowners to remain in the home during construction by completing one zone at a time.
Meridian's housing stock is predominantly post-1990 construction. The majority of homes feature PEX plumbing, 200-amp electrical panels, and energy-efficient windows — but with builder-grade interior finishes that homeowners upgrade as the homes age.
1990s (North Meridian)
Early subdivision homes with standard 90s finishes: oak cabinets, laminate countertops, carpet throughout, and basic tile in bathrooms. These homes are 25-35 years old and are the most common full-remodel candidates.
2000s–2010s (South Meridian, Paramount)
Larger homes with better floor plans but still builder-grade finishes. Many have slab granite installed during the granite boom but are now dated. Cabinets, fixtures, and flooring are the primary upgrade targets.
2015–present (South Meridian expansion)
Newer construction with open floor plans and modern systems. Homeowners typically upgrade finishes 3-7 years after purchase — replacing builder-grade countertops, cabinet hardware, lighting, and flooring.
Common issues in Meridian homes
- •Builder-grade cabinets with particle board shelves and basic hinges wearing out
- •Outdated builder-selected finishes (honey oak, Tuscan tile, slab granite) that feel dated
- •Closed-off floor plans in 1990s homes with walls between kitchen and living areas
- •Insufficient kitchen storage and counter space for today's cooking and entertaining
- •Basic builder lighting that does not adequately illuminate kitchens and bathrooms
- •Original carpet throughout that homeowners want to replace with hard flooring
Material selection affects the look, durability, and cost of your whole-home remodel. Here are the most popular options we install in Meridian:
Luxury Vinyl Plank (LVP)
$4–$10 per sq ft installedThe most popular whole-home flooring choice in the Treasure Valley. LVP is waterproof, scratch-resistant, available in realistic wood-look patterns, and installs quickly over existing subfloors. It provides a consistent look from room to room.
Best for: Main living areas, hallways, bedrooms, and kitchens
Engineered Hardwood
$8–$16 per sq ft installedA premium flooring option that provides real wood appearance and feel with better dimensional stability than solid hardwood. Available in oak, hickory, maple, and walnut species with various stain options.
Best for: Living rooms, dining rooms, and bedrooms in climate-controlled environments
Quartz Countertops
$50–$120 per sq ft fabricated and installedEngineered quartz is the go-to countertop surface for kitchen and bathroom renovations. Non-porous, stain-resistant, and available in hundreds of colors and patterns. Consistent appearance across multiple rooms.
Best for: Kitchen countertops, bathroom vanities, and laundry surfaces
Semi-Custom Cabinetry
$250–$600 per linear foot installedSemi-custom cabinets offer the best balance of quality, options, and value for whole-home projects. More door styles, finishes, and sizing flexibility than stock cabinets, with 4-8 week lead times.
Best for: Kitchen, bathroom, laundry, and built-in storage throughout the home
Interior Paint — Premium Grade
$3–$6 per sq ft of wall area (labor and material)High-quality interior paints from brands like Benjamin Moore, Sherwin-Williams, or PPG provide better coverage, durability, and washability than builder-grade paint. Consistent sheen and color throughout the home.
Best for: Every wall and ceiling surface in the home
Here is how a typical whole-home remodel project works from first contact to final walkthrough:
1
Whole-Home Assessment and Goal Setting
We walk every room with you, documenting what works and what does not. We discuss your vision for layout, flow, finishes, and function — then establish a realistic budget range and phasing strategy if needed. You receive a preliminary scope and conceptual plan within one to two weeks.
2
Design Development and Finish Selection
We develop a comprehensive design plan covering layout changes, flooring selections, cabinet and countertop choices, paint colors, lighting plans, fixture selections, and hardware finishes for every room. Consistency across the home is a primary focus at this stage.
3
Permitting and Trade Coordination
We pull all required permits through Ada County or Canyon County — structural, electrical, plumbing, and mechanical as needed. We schedule and sequence every trade so work flows efficiently from demolition through finish.
4
Demolition and Structural Work
Controlled demolition begins zone by zone. Wall removals, structural headers, framing modifications, subfloor repairs, and any foundation or crawlspace work are completed first. Rough inspections are scheduled before closing walls.
5
Systems Rough-In: Electrical, Plumbing, HVAC
All wiring, plumbing lines, HVAC ductwork, and insulation are installed or updated throughout the home. Panel upgrades, new circuits for kitchens and bathrooms, and updated supply and drain lines are completed during this phase.
6
Finish Installation: Floors, Walls, Trim, Fixtures
Drywall, tape, and texture are completed. Flooring is installed throughout, followed by trim, doors, cabinetry, countertops, tile, fixtures, lighting, and hardware. Paint is applied after trim and before final fixture installation.
7
Final Inspections and Comprehensive Walkthrough
We complete all final inspections, address every punch list item, test all systems and fixtures, and conduct a thorough room-by-room walkthrough with you to confirm everything meets the agreed-upon scope and quality standards.
Here is what to expect for project duration when planning a whole-home remodel in Meridian:
| Phase | Duration | Details |
|---|---|---|
| Planning and Design | 4–8 weeks | Comprehensive home assessment, design development, material selections, trade scheduling, and contract finalization. Larger homes with more complex scopes require longer planning. |
| Permitting | 2–4 weeks | Permit applications for structural, electrical, plumbing, and mechanical work through Ada County or Canyon County. Multiple permits may be required for whole-home projects. |
| Demolition and Structural Work | 1–3 weeks | Controlled demolition, wall removals, structural modifications, subfloor repair, and framing. Scope depends on how much of the existing structure is being modified. |
| Systems Rough-In | 2–4 weeks | Electrical rewiring, plumbing rough-in, HVAC modifications, and insulation installation throughout the home. Rough inspections are scheduled before closing walls. |
| Finish Work | 4–8 weeks | Drywall, flooring, trim, cabinetry, countertops, tile, paint, fixtures, and hardware installation across every room. This is the longest active construction phase. |
| Final Inspections and Walkthrough | 1–2 weeks | Punch list completion, final inspections, systems testing, and room-by-room walkthrough with the homeowner. |
Typical range: $75,000 – $300,000+
Most projects: $120,000–$200,000
The final cost of your whole-home remodel in Meridian depends on several factors. Here are the biggest cost drivers:
Square Footage and Number of Rooms
high impactThe size of the home and the number of rooms being renovated is the primary cost driver. A 1,500 sq ft home costs significantly less than a 3,000 sq ft home with the same scope of work per room.
Structural and Layout Changes
high impactRemoving load-bearing walls, adding structural headers, modifying the floor plan, or opening up rooms requires engineering, permits, and additional framing labor that adds significant cost.
Kitchen and Bathroom Scope
high impactKitchens and bathrooms are the most expensive rooms to renovate per square foot due to cabinetry, countertops, plumbing, tile, and specialized labor. The number and scope of kitchen and bath renovations heavily influences total project cost.
Electrical and Plumbing System Updates
medium impactOlder homes may need panel upgrades, rewiring, new circuits, updated plumbing supply lines, or drain modifications. These system-level updates add cost but are essential for safety and code compliance.
Finish Level and Material Selections
medium impactThe gap between builder-grade and mid-range finishes can add 30-50% to material costs. Premium flooring, quartz countertops, semi-custom cabinets, and quality fixtures all contribute to the overall finish budget.
Phasing and Temporary Living Arrangements
low impactIf the project is large enough to require temporary relocation, housing costs add to the overall budget. Phased projects that allow you to live in part of the home during construction may take longer but avoid relocation costs.
Problem: Compartmentalized floor plan with poor flow between rooms
Solution: We remove or modify interior walls to create open-concept living areas, install structural headers where needed, and unify flooring and finishes across the connected spaces.
Problem: Inconsistent finishes from years of piecemeal updates
Solution: A whole-home remodel ensures consistent flooring, trim profiles, paint colors, door hardware, and fixture finishes throughout — eliminating the patchwork look of decades of small projects.
Problem: Outdated electrical system that cannot support modern loads
Solution: We upgrade the electrical panel, add dedicated circuits for kitchens and bathrooms, install GFCI and AFCI protection where required by code, and add outlets and lighting throughout the home.
Problem: Poor insulation and energy inefficiency
Solution: During the renovation, we upgrade insulation in walls, attics, and crawlspaces — improving comfort and reducing heating and cooling costs in Boise's hot summers and cold winters.
Problem: Deferred maintenance hidden behind walls and under floors
Solution: A whole-home renovation exposes framing, plumbing, and wiring that may have been hidden for decades. We identify and repair water damage, pest damage, improper wiring, and failing plumbing during the demolition phase.
Meridian shares Boise's semi-arid climate with hot summers, cold winters, and low humidity. The same material and construction considerations apply — UV resistance for exterior materials, freeze-thaw durability, and proper insulation.
Hot Summers (90-105°F)
Exterior materials and finishes must resist UV degradation. West-facing windows and walls get the most sun exposure. Proper insulation and HVAC sizing are critical for comfort.
Cold Winters (15-30°F)
Frost depth requirements affect foundation work for additions and ADUs. Plumbing in exterior walls and crawl spaces needs freeze protection.
Wind and Dust
Meridian's open terrain means more wind and dust exposure than central Boise. Exterior finish quality and window sealing matter for long-term durability.
Low Precipitation
Less rain means less exterior moisture exposure, which is favorable for siding and paint longevity. However, irrigation and ground moisture around foundations still require attention.
South Meridian
The largest and fastest-growing area, with subdivisions built from 2005 to present. Homes range from 1,500 to 3,500+ square feet with builder-grade finishes that homeowners customize over time.
Common projects in South Meridian:
- •Kitchen remodels upgrading builder cabinets and countertops
- •Bathroom remodels converting tub/shower combos to walk-in showers
- •Outdoor living — decks, patios, and pergolas
- •Flooring upgrades replacing builder carpet with LVP or hardwood
North Meridian
Established neighborhoods with homes from the 1990s and early 2000s. These homes are 20-30+ years old and ready for comprehensive updates.
Common projects in North Meridian:
- •Full kitchen renovations with layout changes
- •Primary bathroom remodels
- •Whole-home remodels bringing homes to current standards
- •Home additions for growing families
Paramount / Lochsa Falls
Mid-to-upper market subdivisions with larger homes (2,500-4,000+ sq ft). Homeowners here often pursue higher-end finishes and design-focused remodels.
Common projects in Paramount / Lochsa Falls:
- •Premium kitchen remodels with custom or semi-custom cabinetry
- •Luxury bathroom remodels with freestanding tubs and custom tile
- •Basement finishing for entertainment and living space
- •Home office additions or conversions
Permit authority: City of Meridian Building Department
Online portal: https://meridiancity.org/building
- ✓Permits required for plumbing, electrical, structural, and mechanical work
- ✓HOA approval may be required before city permits for exterior changes
- ✓Online permit portal available for application and tracking
- ✓Standard residential permit processing is typically 1-2 weeks
- ✓ADU construction follows specific zoning criteria with additional review
- ✓Impact fees apply to additions and ADUs that increase square footage
- ●Floor plan flow — ensure natural traffic patterns between kitchen, dining, living, and bedrooms without bottlenecks or wasted hallway space
- ●Flooring continuity — using the same flooring material throughout main living areas creates a seamless, spacious feel and simplifies transitions
- ●Lighting plan — layer ambient, task, and accent lighting in every room; use consistent fixture finishes and consider smart lighting controls
- ●Storage strategy — plan built-in storage, closet systems, and cabinetry for every room to reduce clutter and maximize function
- ●Color palette — select a cohesive whole-home color scheme with complementary tones that flow naturally from room to room
- ●Mechanical system placement — plan HVAC returns, electrical panels, and plumbing access points so they do not conflict with the finished design
Here are the design trends we see most often in Meridian whole-home remodel projects:
- →White and light gray kitchen cabinets replacing dark or honey oak
- →Quartz countertops replacing outdated granite slab installations
- →Open-concept kitchen and living room conversions
- →Walk-in showers with frameless glass in primary bathrooms
- →Luxury vinyl plank flooring throughout main living areas
- →Modern farmhouse and transitional design aesthetics
- →Large kitchen islands with seating and storage
- →Outdoor living spaces — covered patios, pergolas, and fire features
Meridian's real estate market has grown dramatically, with median home values rising alongside Boise's. The city's family-friendly reputation and strong school district make it one of the most desirable markets in Idaho. Homeowners who remodel in Meridian see strong returns — updated kitchens and bathrooms are the top features buyers look for in this market.
✓Licensed general contractor managing all trades under one contract
✓Dedicated project manager for the duration of the renovation
✓Detailed room-by-room scope of work with fixed pricing
✓Weekly progress updates with photos and schedule status
✓All work performed by licensed, insured subcontractors
✓Post-project warranty covering workmanship across the entire home
How long does a whole-home remodel take?
A typical whole-home remodel takes 3 to 6 months of active construction, depending on the size of the home and scope of work. Including planning, design, permitting, and material lead times, the total project timeline is usually 5 to 9 months from first meeting to final walkthrough.
Can I live in my home during a whole-home remodel?
It depends on the scope. Some projects can be phased so you live in one part of the home while another is under construction. Full gut renovations typically require temporary relocation for 2-4 months. We help plan the phasing strategy during the design phase.
Is it cheaper to remodel all at once or room by room?
Remodeling all at once is almost always more cost-effective. You save on mobilization costs, trade scheduling, and material purchases. Flooring, paint, and trim installed throughout the house in one project cost less per unit than the same work done in five separate projects over five years.
Do whole-home remodels require permits?
Yes. Most whole-home remodels involve structural, electrical, plumbing, and mechanical work that requires permits in Ada County and Canyon County. We manage all permit applications, inspections, and code compliance as part of our scope.
What is the ROI on a whole-home remodel?
A well-executed whole-home remodel in the Boise market typically recoups 50-70% of its cost at resale, depending on the neighborhood, scope, and finish level. More importantly, it transforms your daily living experience and can add 15-25 years of usable life to an aging home.
How do you handle design consistency across rooms?
We develop a whole-home design package before construction begins — selecting flooring, trim profiles, door hardware, paint colors, lighting fixtures, and plumbing finishes that work together across every room. This ensures a cohesive result rather than a collection of disconnected renovations.
What is included in a whole-home remodel?
A comprehensive whole-home remodel typically includes flooring throughout, kitchen renovation, bathroom renovations, paint and trim, lighting and electrical updates, plumbing updates, HVAC improvements, and any layout or structural changes. The exact scope is customized to your goals and budget.
Do you offer financing for whole-home remodels?
We can provide guidance on financing options including home equity loans, HELOCs, and renovation loans. We also work with phased payment schedules tied to project milestones so you are never paying ahead of completed work.
Are open-concept remodels common in Meridian?
Yes. Many Meridian homes built in the 1990s and early 2000s have closed-off kitchens with walls separating the kitchen from the living and dining areas. Opening these walls is one of the most popular and impactful remodeling projects in Meridian.
Do Meridian HOAs affect remodeling projects?
For interior work, HOAs are generally not involved. For exterior changes — siding, paint colors, roofing, fencing, and additions — many Meridian HOAs require pre-approval. We recommend checking your HOA guidelines before starting exterior work.
Start your whole-home remodel in Meridian
Get a free, no-obligation estimate for whole-home remodeling in Meridian, ID. We handle design, permits, and every detail of construction.
Get Your Free Estimate