Deck Design Ideas for Boise Homes
Explore layouts, outdoor living features, and design inspiration for custom decks built for Boise's climate and lifestyle. From multi-level entertaining platforms to intimate ground-level retreats, find the design direction that transforms your backyard.
The Treasure Valley's diverse terrain — from flat subdivisions in Meridian and Nampa to sloped foothills lots in northeast Boise and Eagle — demands different deck configurations. Choosing the right layout is the single most important design decision because it determines traffic flow, functionality, and how well the deck integrates with your home and landscape.
Single-Level Platform
The most common and versatile deck configuration, built at a single elevation flush with the home's main floor. Ideal for flat lots throughout Meridian, Nampa, Caldwell, and south Boise subdivisions where the grade change from the back door to the yard is minimal.
Key features and considerations:
- Seamless indoor-outdoor transition through sliding or French doors
- Simplest framing design keeps construction costs lower
- Full flexibility for furniture arrangement and zone planning
- Easy to add a pergola, shade sail, or roof extension
- Works with any decking material: composite, cedar, pressure-treated
- Best option for ADA-accessible deck designs
Multi-Level Deck
Two or three platforms connected by short stair runs, stepping down the terrain. This is the premier layout for Boise foothills properties and any lot with more than 2 to 3 feet of grade change across the deck footprint. Each level becomes a naturally defined activity zone.
Key features and considerations:
- Upper level at door height for dining and kitchen access
- Middle level for lounging, conversation, and fire features
- Lower level for hot tub, fire pit, or yard transition
- Follows the slope instead of fighting it, reducing foundation costs
- Creates visual interest and architectural dimension
- Allows privacy separation between zones on busy entertaining nights
Wraparound Deck
Extends around two or more sides of the home, providing outdoor access from multiple rooms and maximizing sun and shade exposure throughout the day. Particularly effective on corner lots and homes with views in multiple directions across the Boise valley.
Key features and considerations:
- Morning sun on the east side, afternoon shade on the west side
- Access from kitchen, living room, and master bedroom
- Multiple distinct outdoor rooms along the deck's length
- Maximizes usable outdoor square footage on compact lots
- Creates a continuous outdoor pathway around the home
- Ideal for homes oriented toward Bogus Basin or downtown Boise views
Rooftop or Elevated Deck
Built above a garage, ground-floor room, or steep slope, elevated decks unlock outdoor living space on properties where ground-level construction is not feasible. Common on hillside lots in Boise's North End and foothills neighborhoods with walkout basements.
Key features and considerations:
- Creates usable outdoor space where grade makes ground-level decks impractical
- Elevated vantage point captures panoramic foothill and valley views
- Underneath space can serve as covered patio or storage
- Requires engineered structural design with deeper footings and larger posts
- Railing design is critical for safety and aesthetics at height
- Often combined with spiral or switchback stairs to yard level
Floating / Ground-Level Deck
A freestanding platform set directly on or just above the ground, not attached to the home's structure. Perfect for flat yards in Meridian, Nampa, and Star where homeowners want a defined outdoor living area without the complexity and cost of an elevated, attached deck.
Key features and considerations:
- No ledger board attachment to the house eliminates flashing concerns
- Often exempt from building permits if under 30 inches above grade
- Can be placed anywhere in the yard: around a fire pit, pool, or garden
- Lower cost due to minimal framing height and simpler footings
- Easy to build in phases or expand later
- Hidden fastener systems create a clean, floating appearance
A well-designed deck is not just a platform — it is an extension of your home with clearly defined zones for dining, lounging, cooking, and gathering. Boise's six-month outdoor season (May through October) and over 200 sunny days per year make outdoor living rooms one of the highest-return investments for Treasure Valley homeowners.
Defining Activity Zones
The most functional decks divide the total square footage into distinct areas, each designed for a specific activity. This prevents the common problem of a large, open deck that feels undefined and underused. We recommend planning zones before finalizing the deck footprint so the structure supports the intended use.
- Dining zone: Adjacent to the kitchen door or outdoor kitchen. Sized for your table plus 36 inches of clearance on all sides for chair movement. Overhead shade is essential for daytime dining in Boise summers.
- Lounging zone: Deep seating, sectionals, and chaise lounges oriented toward the best view or away from the afternoon sun. Allow 8 by 10 feet minimum for a conversation grouping.
- Cooking zone: Grill, prep counter, and serving area positioned downwind from seating to direct smoke away from guests. Minimum 6 by 4 feet for a basic grill station; 10 by 6 feet for a full outdoor kitchen.
- Fire pit zone: Circular or semicircular seating around a fire feature. Allow a 5-foot clearance radius from the fire source to any combustible railing, furniture, or overhead structure.
Weather Protection for Boise's Climate
Boise's summers are intense — temperatures regularly exceed 100 degrees Fahrenheit from late June through August, with direct sun exposure that makes an unshaded deck unusable during peak afternoon hours. Planning weather protection into your deck design is not optional; it is what separates a deck you use from one you avoid.
Pergola
Provides filtered shade through spaced rafters. Add climbing vines (wisteria, Virginia creeper) for natural coverage that increases over time. Reduces deck surface temperature by 15 to 25 degrees. Can be attached to the house or freestanding.
Shade Sail
Tensioned fabric panels mounted between posts or anchor points. UV-blocking fabric reduces sun exposure by 90% or more. Easy to install, remove seasonally, and reposition. Cost-effective shade solution starting at $200 to $600 for DIY installation.
Retractable Awning
Motorized or manual fabric awning mounted to the home's fascia. Extends to cover 8 to 16 feet of deck depth. Retracts completely when full sun is desired or during wind events. Professional installation runs $2,000 to $5,000 for motorized models.
Solid Roof Extension
A permanent roof over part of the deck provides complete weather protection — shade in summer, rain cover in spring and fall, and snow protection in winter. Extends the usable season by two to three months. Requires building permit and structural engineering.
Boise's long summers and culture of outdoor entertaining make outdoor kitchens one of the most popular deck upgrades in the Treasure Valley. From a simple built-in grill island to a fully equipped cooking station with sink, refrigerator, and pizza oven, the right outdoor kitchen transforms your deck into the center of every gathering.
Built-In Grill Island
A permanent grill station framed with steel studs and clad in stone, stucco, or composite panels. Houses a drop-in grill, side burner, and storage drawers. Typical footprint: 6 to 8 feet long by 30 inches deep. Gas line from the home eliminates propane tank hassles.
Counter & Prep Space
Granite, concrete, or tile countertops flanking the grill provide essential workspace for food prep, plating, and serving. Plan for at least 24 inches of counter on each side of the grill. Include a trash pullout and paper towel holder within arm's reach.
Plumbing & Electrical
An outdoor sink requires running hot and cold water supply lines and a drain line from the home. Electrical for lighting, outlets, and a refrigerator requires a dedicated circuit with GFCI protection. Plan utility runs before deck framing to route through the substructure.
Pizza Oven Trend
Wood-fired and gas pizza ovens are surging in popularity across Boise outdoor kitchens. Countertop models start at $500; built-in masonry ovens run $3,000 to $8,000. They double as bread ovens and reach 800+ degrees for authentic Neapolitan-style cooking.
Popular Outdoor Kitchen Configurations
- L-shaped island: Grill on one leg, prep and serving counter on the other. Creates a natural work triangle and keeps the cook facing guests. Most popular configuration for Boise deck kitchens.
- Straight-run island: Single linear counter with grill centered, flanked by counter space. Best for narrow decks or placement against a railing. Compact footprint, lower cost.
- U-shaped station: Wraparound counter creates an enclosed cooking area with maximum workspace. Includes grill, sink, refrigerator, and bar seating on the exterior face. Premium configuration for serious entertainers.
- Freestanding grill cart: A mobile option for homeowners not ready to commit to a built-in. High-quality stainless carts with side tables and storage provide flexibility to reposition seasonally.
Gas Line Considerations
- Natural gas line extension from the home requires a licensed plumber and Intermountain Gas coordination in the Boise area
- Gas line must be sized for the total BTU load of all connected appliances (grill, side burner, fire pit, heater)
- Shut-off valve required at each appliance and at the point of entry to the deck structure
- Black iron or CSST (corrugated stainless steel tubing) are the approved gas piping materials; CSST requires bonding to the electrical grounding system
- Typical cost for gas line extension to an outdoor kitchen: $500 to $2,000 depending on run length and complexity
In Boise's climate, shade is not a luxury — it is what makes your deck usable during the hottest months. Summer temperatures regularly exceed 105 degrees Fahrenheit, and unshaded composite decking surfaces can reach 150 degrees or higher in direct sun. The right overhead structure extends your comfortable deck season and protects furniture, finishes, and your family from intense UV exposure.
Attached Pergola
Ideal for: Homes where the deck is immediately adjacent to the house and the primary goal is shading a dining or seating area near the back door. The most common shade structure in Treasure Valley deck projects.
Pros
- Anchors directly to the home's fascia or wall for a clean, integrated look
- Filtered shade through spaced rafters creates a dappled light effect
- Supports climbing plants, retractable canopies, or hanging lights
- Structural support from the house reduces the number of posts needed
- Can be designed to match the home's architectural style exactly
Cons
- Attachment to the house requires proper flashing to prevent water intrusion
- Filtered shade is not sufficient for peak-sun hours without added canopy or vines
- Building permit required in Boise for any structure attached to the home
- Limited to the area immediately adjacent to the house wall
Freestanding Pergola
Ideal for: Placement anywhere on the deck or in the yard, independent of the home. Excellent over a hot tub, fire pit area, or detached outdoor kitchen where the house wall is not adjacent.
Pros
- Can be positioned anywhere on the deck regardless of house orientation
- No attachment to the house eliminates flashing and water intrusion concerns
- Four-post design is structurally self-supporting and visually balanced
- Easier to permit than attached structures in some jurisdictions
- Works over hot tubs, fire pits, and freestanding seating areas
Cons
- Four posts consume more deck floor space than two-post attached designs
- Posts require footings independent of the deck structure
- Heavier visual impact on the deck due to full post framework
Louvered Roof System
Ideal for: Homeowners who want adjustable shade control — full sun, partial shade, or complete rain protection on demand. The premium option for Boise decks where year-round use is the goal.
Pros
- Motorized louvers rotate from fully open to fully closed with a remote or app
- Fully closed position provides complete rain and snow protection
- Fully open position allows maximum sun and airflow
- Integrated gutter system channels water away from the deck surface
- Extends usable deck season into late fall and early spring
Cons
- Premium cost: $15,000 to $40,000+ depending on size and brand
- Motorized components require electrical connection and periodic maintenance
- Heavier structure requires engineered footings and potentially larger posts
- Limited to standard rectangular footprints (custom shapes add significant cost)
Shade Sails & Fabric Canopies
Ideal for: Budget-conscious shade solutions, rental properties, or decks where permanent overhead structures are not desired. Popular on smaller decks and as supplemental shade alongside a pergola.
Pros
- Lowest cost shade option: $200 to $800 for quality UV-blocking fabric
- Quick installation using posts, wall mounts, or existing structures
- Easily removable for winter storage or repositioning
- UV-blocking fabric reduces sun exposure by 90% or more
- Available in dozens of colors and shapes to complement any deck aesthetic
Cons
- Not wind-resistant — must be removed during Boise's occasional strong wind events
- Fabric degrades after 5 to 8 years of UV exposure and requires replacement
- No rain protection — water pools on flat sail surfaces
- Less polished appearance than permanent structures
A hot tub is one of the most requested deck features in the Boise area, and for good reason — it extends your outdoor season into fall and winter, provides a year-round relaxation retreat, and adds significant appeal to your home. However, hot tub placement on a deck requires careful structural planning that must be addressed during the design phase, not after construction.
Structural Requirements
Weight Load
A standard 4 to 6 person hot tub weighs 800 to 1,000 pounds empty, 3,500 to 5,000 pounds filled with water, and 4,500 to 6,000 pounds with occupants. This concentrated load far exceeds the standard deck design load of 40 PSF for live loads and 10 PSF for dead loads.
Framing Upgrades
The deck area beneath the hot tub requires doubled or tripled joists, reduced joist spacing (8 to 12 inches on center instead of the standard 16 inches), larger beams, and additional footings. Some designs use a dedicated concrete pad beneath the deck with posts transferring the hot tub load directly to the pad.
Electrical Requirements
Most hot tubs require a dedicated 240-volt, 50-amp circuit with a GFCI-protected disconnect panel mounted within line of sight of the tub but at least 5 feet away. This is a licensed electrician job that must pass inspection in Boise and Ada County.
Drainage Design
Water from splashing, rain, and periodic draining must be managed. Deck boards around the hot tub should slope slightly away from the tub. A floor drain or channel drain directs water to the yard or a drainage point. Standing water on the deck surface accelerates material degradation and creates slip hazards.
Design & Placement Strategies
Recessed (Sunken) Installation
Dropping the hot tub into the deck surface so the rim is flush with the deck boards creates a sleek, built-in appearance. Requires a deeper substructure and access panels for equipment maintenance beneath the tub. The most visually integrated option.
Raised Platform
Placing the hot tub on a raised section of the deck (one or two steps up) creates a distinct zone and provides easier access to the tub's equipment panel. Steps also serve as seating when the tub is not in use.
Privacy Screening
Lattice panels, vertical slat privacy walls, landscaping, or pergola curtains around the hot tub area provide seclusion from neighbors. In Boise's foothills neighborhoods, privacy screening on the downhill side is especially important where properties look down on each other.
Corner Placement
Positioning the hot tub in a corner of the deck, against two railing sections, creates a natural enclosure. Two sides are already defined by the railing, reducing the need for additional privacy screening. This also concentrates the structural load near support posts and footings.
Deck railing is one of the most visible design elements of your outdoor space — it defines the aesthetic character, frames views, and must meet safety codes simultaneously. Boise building code requires a 36-inch minimum railing height for residential decks over 30 inches above grade, with balusters or infill spaced no more than 4 inches apart. Within those requirements, you have significant design freedom.
Cable Railing
Thin stainless steel cables (3/16 inch diameter) stretched horizontally between metal or wood posts. The most popular choice for Boise foothills homes where preserving mountain and valley views is a priority. Cables are nearly invisible from a distance, creating an open, modern look.
Cost: $50-$120 per linear foot installed. Posts in stainless steel, aluminum, or wood. Cables require periodic tension adjustment (once every 1-2 years). Best paired with composite or metal post sleeves for low maintenance.
Glass Panel Railing
Tempered glass panels (3/8 to 1/2 inch thick) mounted in aluminum channels or between posts. Provides completely unobstructed views and acts as a wind barrier, making the deck more comfortable during Boise's occasional gusty evenings.
Cost: $80-$200 per linear foot installed. Tempered safety glass meets code. Requires regular cleaning to maintain clarity. Frameless (standoff-mounted) or framed (channel-mounted) options available.
Traditional Wood Balusters
Vertical wood pickets (2x2 or turned profiles) between top and bottom rails. Classic, warm appearance that suits Craftsman, farmhouse, and traditional Boise home styles. Available in cedar, redwood, or pressure-treated lumber.
Cost: $20-$50 per linear foot installed. Requires staining or painting every 1-3 years in Boise's UV-intense climate. Most affordable railing option. Can be combined with composite post sleeves for a hybrid look.
Horizontal Metal Bars
Horizontal aluminum or steel tubes spaced at code-compliant intervals between posts. Creates a contemporary, linear aesthetic that complements modern and mountain-modern Boise homes. Clean lines and industrial character.
Cost: $60-$100 per linear foot installed. Powder-coated aluminum resists Boise's dry climate well. No cable tension maintenance required. Available in black, bronze, white, and custom colors.
Composite Railing Systems
Factory-engineered railing kits from brands like Trex, TimberTech, and Deckorators that match composite decking colors and textures. Consistent appearance, no painting or staining, and designed for quick installation.
Cost: $40-$80 per linear foot installed. Color-matched to decking for a cohesive look. 25-year warranty typical. Balusters available in composite, aluminum, or mixed materials.
Mixed Material Railing
Combining two or more materials in a single railing design: wood posts with cable infill, metal top rail with composite balusters, or glass panels in a wood frame. This approach lets you balance aesthetics, view preservation, and budget.
Cost varies by combination. Wood posts with cable infill is the most popular hybrid in Boise. Allows you to use premium materials where they have the most visual impact and budget materials where they are less visible.
Lighting transforms your deck from a daytime space into an evening destination. During Boise's long summer evenings — sunset does not occur until 9:15 PM in late June — well-planned lighting extends entertaining hours and creates atmosphere that makes your outdoor space feel like a true room. The best deck lighting designs layer multiple types for both function and mood.
Functional Lighting
- Post cap lights: Low-profile fixtures that sit on top of railing posts, casting light downward onto the deck surface. Solar-powered or low-voltage options. Installed on every other post or every post for consistent perimeter lighting.
- Stair riser lights: Small LED fixtures recessed into each stair riser for safe navigation after dark. Essential for multi-level decks and any stairway. Code does not require stair lighting, but it is a critical safety feature we include in every multi-level deck design.
- Under-rail LED strips: Continuous LED tape mounted beneath the top rail, casting a soft downward glow along the deck perimeter. Provides ambient light without visible fixtures. Warm white (2700K) recommended for a natural, inviting feel.
- Task lighting: Focused light over the outdoor kitchen, grill, and dining areas. Recessed downlights in a pergola roof or adjustable spotlights mounted on the house wall. Bright enough for food prep (300+ lumens) but dimmable for dining.
Ambiance & Atmosphere
- String lights: The single most impactful ambiance element for Boise decks. Commercial-grade Edison-style bulbs (S14 or ST19) on weatherproof cable strung between posts, the house, and pergola. Creates a warm, festive atmosphere that defines the space overhead. Use 2200K bulbs for the warmest glow.
- Landscape lighting integration: Uplighting trees, plantings, and architectural features adjacent to the deck extends the illuminated zone beyond the deck surface and connects the deck visually to the surrounding yard. Low-voltage landscape fixtures on a shared transformer simplify wiring.
- In-deck flush lights: Small LED fixtures recessed flush into the deck boards, creating ground-level pools of light. Ideal for marking path edges, stair landings, and the perimeter of hot tub areas. Waterproof IP67-rated fixtures are required.
- Smart lighting systems: Wi-Fi or Bluetooth-controlled lighting (Lutron Caseta, Hue Outdoor, or landscape-specific controllers) allows dimming, scheduling, and scene creation from your phone. Set a “dinner party” scene that dims string lights, brightens the kitchen area, and activates stair lights automatically at sunset.
Electrical planning tip: All outdoor deck lighting should be on dedicated circuits with GFCI protection. Plan low-voltage transformer locations and wire runs during the deck framing phase — running wires through the substructure is dramatically easier before decking boards are installed. We include a wiring plan in every deck design package.
Fire features are the centerpiece of evening outdoor living in Boise. They extend your deck season into cool spring and fall evenings, create a natural gathering point, and add dramatic visual warmth. From built-in fire pits to sleek linear gas fireplaces, fire features require specific safety planning on a combustible deck structure.
Fire Feature Types
Built-In Gas Fire Pit
A permanent fire pit built into the deck surface or an adjacent stone surround. Fueled by a natural gas line from the home for unlimited burn time with no propane tanks to refill. Decorative fire glass, lava rock, or ceramic logs cover the burner. Most popular fire feature for Boise decks. Typical cost: $2,000 to $6,000 installed.
Fire Table
A freestanding table with an integrated gas burner in the center. Combines a fire feature with a functional table surface around the perimeter. Available in propane or natural gas. Can be repositioned seasonally. Range: $500 to $3,000 depending on size and materials.
Linear Gas Fireplace
A long, narrow gas burner (36 to 72 inches) set into a wall, bench, or railing structure. Creates a modern, architectural fire element that serves as a design focal point. Often installed in a deck privacy wall or seating bench back. Premium option: $3,000 to $8,000 installed.
Tabletop Fire Bowl
Small, portable propane or gel-fuel fire bowls that sit on any table or flat surface. No installation required. Provides ambiance and a small amount of warmth for intimate gatherings. The easiest way to add fire to any deck immediately. Cost: $50 to $300.
Safety & Code Requirements
Fire features on a wood or composite deck surface require specific safety measures to prevent fire hazards. Boise's fire code and the International Residential Code (IRC) govern what is permitted on combustible deck surfaces.
- Clearance: Minimum 5-foot clearance from any open flame to combustible railings, overhead structures, furniture, and the home's exterior wall. This applies to both gas and wood-burning features.
- Non-combustible pad: Gas fire pits on composite or wood decks require a non-combustible base (stone, tile, or cement board) beneath and extending 12 inches beyond the fire feature in all directions.
- Gas vs. wood-burning: Gas fire features are generally permitted on decks with proper clearances and ventilation. Wood-burning fire pits are prohibited on combustible deck surfaces in most jurisdictions, including within Boise city limits. Wood-burning features should be placed on a stone or concrete patio adjacent to the deck.
- Ventilation: Gas fire features produce carbon monoxide. They must be used in open-air or well-ventilated areas only. Never place a gas fire feature under a fully enclosed overhead structure.
- Shut-off valve: A gas shut-off valve must be accessible within 6 feet of the fire feature. We install a key valve in the deck surface or a shut-off within the fire pit surround for quick access.
Seating arrangement: Plan seating in a semicircle or full circle around the fire feature, with the closest seats 3 to 4 feet from the flame for comfort. Built-in bench seating around a fire pit is the most popular configuration in our Boise projects, providing permanent seating that doubles as a deck railing or border element.
Common questions about deck design for Boise homes.
What is the best deck layout for a sloped Boise foothills lot?
Multi-level decks are the ideal solution for sloped foothills lots in Boise. By stepping the deck down the slope in two or three tiers, you follow the natural grade instead of fighting it. This reduces the need for tall posts and deep footings, lowers material costs compared to a single elevated platform, and creates naturally defined zones for dining, lounging, and cooking. We typically design the upper level flush with the home's main floor for seamless indoor-outdoor flow, with stairs connecting to lower entertaining and fire pit levels.
How long is the outdoor season for a deck in Boise?
Boise's outdoor deck season runs roughly six months, from early May through mid-October. Daytime temperatures during this window range from the mid-70s to over 100 degrees Fahrenheit. However, with the right design features you can extend this season by two or more months. Covered sections, outdoor heaters, a fire pit, and wind screens allow comfortable use from late March through November. Many of our clients use their covered deck areas year-round for hot tub access and casual evenings near a gas fire feature.
Do I need a permit to build a deck in Boise?
Yes. In the City of Boise and Ada County, any deck over 30 inches above grade requires a building permit. This includes most attached decks, elevated decks, and multi-level designs. The permit process requires a site plan showing setbacks, a structural framing plan, and details on footings, ledger board attachment, and railing. Ground-level decks (under 30 inches) that are not attached to the house may be exempt, but we recommend confirming with the building department. Permit fees in Boise typically range from $150 to $500 depending on project size.
What deck railing style works best for view preservation?
Cable railing and glass panel railing are the two best options for preserving views from your Boise deck. Cable railing uses thin stainless steel cables stretched horizontally between posts, creating near-invisible sight lines to the foothills, Bogus Basin, or your backyard landscape. Glass panel railing offers completely unobstructed views and acts as a wind break. Both meet IRC code requirements for 36-inch residential railing height and 4-inch maximum opening spacing. Cable railing is more affordable ($50-$120 per linear foot installed) while glass panels run $80-$200 per linear foot.
Can I put a hot tub on my deck in Boise?
Yes, but the deck must be specifically engineered to support the weight. A filled hot tub with occupants can weigh 4,000 to 6,000 pounds, far exceeding standard deck load ratings of 40 pounds per square foot for live loads. Hot tub placement requires doubled or tripled joists, reduced joist spacing (8 to 12 inches on center instead of 16), larger beam sizes, and additional footings beneath the tub location. We also plan for a dedicated 240-volt, 50-amp electrical circuit, GFCI protection, and proper drainage so splashed or drained water does not pool on the deck surface.
What is the most popular deck material in Boise right now?
Composite decking (brands like Trex, TimberTech, and Fiberon) accounts for approximately 65% of the new decks we build in the Boise area. Composite's popularity comes from its low maintenance in Boise's dry, UV-intense climate: no annual staining, no splintering, and 25-year fade and stain warranties. Pressure-treated lumber remains popular for budget-conscious projects and is used on roughly 25% of our builds. Cedar and redwood make up the remaining 10%, chosen by homeowners who prefer the natural look and are willing to maintain the wood every one to two years.
Explore our complete library of deck building guides for Boise homeowners.
Deck Builder Service
Our full deck building service overview
Deck Cost Guide
Detailed pricing for Boise deck projects
Deck Build Timeline
Phase-by-phase scheduling breakdown
Deck Materials Guide
Composite, cedar, pressure-treated & more
Decks & Patios Hub
All deck and patio services overview
Deck Design Guide for Boise
In-depth Boise deck design planning guide
Let's Design Your Dream Deck
From layout planning to material selection, our design team brings your outdoor vision to life. Schedule a free consultation to start planning your Boise deck project.